CrystalDiskInfo Free Download For Windows
CrystalDiskInfo is a storage drive monitoring program for Windows. With it, you can check the performance and health of your hard drives, SSDs, USB flash drives, SD cards, and basically any storage device you can connect to your PC, whether internal or external. The program provides all the information you need about your drives, allowing you to anticipate potential failures and perform maintenance tasks.
Get detailed information about your discs
CrystalDiskInfo allows you to access SMART (Self-Monitoring, Analysis, and Reporting Technology) information for all your storage drives. This technology, incorporated by all disk manufacturers, provides essential data on the physical health of the drive. When you open the program, you can see all the storage drives you have connected.
On the left side, you can see the overall health status and an approximate lifespan percentage (especially useful for SSD drives). You can also see the temperature, serial number, firmware, interface, drive letter, functions, amount of data written, amount of data read, times you’ve powered on the drive, and the total number of hours it’s been powered on. ngrok install for Windows
Parameters you can see in CrystalDiskInfo
You’ll be able to see parameters such as current temperature, total operating time, number of startups, read and write speed, reallocated sectors, read errors, and much more. If any parameter is out of order, the app will flag it so you can identify it and perform a backup as soon as possible. For example, if you have too many reallocated sectors, the storage drive will become unreliable, and it’s best to replace it as soon as possible.
Customize alerts and automatic monitoring
With CrystalDiskInfo, you can configure alerts when a parameter goes out of range. If one of the SMART parameters exceeds normal limits, you can receive an automatic on-screen notification or even activate warning sounds. You can also set custom limits for parameters such as temperature or error count, depending on your needs or the type of hardware you’re using.
Compatible with a wide variety of devices and technologies
CrystalDiskInfo supports a wide range of technologies and standards, ensuring compatibility with almost any hardware configuration. It recognizes drives connected via SATA, NVMe, USB, and RAID, provided the latter are properly recognized by the operating system. It also supports advanced features such as TRIM on SSDs, helping you extend the lifespan of your solid-state drives through more efficient maintenance. However, CrystalDiskInfo does not allow you to monitor network-connected storage drives. If you remotely access a server or have your HDDs in a NAS, you will not be able to view SMART information.
Download CrystalDiskInfo and see all the detailed information about your storage drives in Windows.
Frequently Asked Questions
Is CrystalDiskInfo for Mac?
No, CrystalDiskInfo is not available for Mac. CrystalDiskInfo is only available on Windows, covering Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, and Windows 11; as well as various versions of Windows Server.
Is CrystalDiskInfo safe?
Yes, CrystalDiskInfo is completely safe. VirusTotal scans show that its latest versions have zero positive results, and the program has an impeccable track record over the years.
Is CrystalDiskInfo portable?
No, CrystalDiskInfo is not portable. The program requires installation, although due to its small size, this process will only take a few seconds. The installation process is also completely safe.
Leave a Reply